Showing posts with label Tutorial printer. Show all posts
Showing posts with label Tutorial printer. Show all posts
Tuesday, August 22, 2017
The Cause and Solution the Printer Can'nt Print
August 22, 2017
The printer is damaged shall not be discarded into the trash just yet. You can fix it yourself at home there are a few possible reply cause printer can not print, here for example:
1. Printer Connections-check the connections with electrical network printer in your home – make sure the printer power cable has been plugged into the power cord connector perfectly
2. Switch Printer-make sure the switch is "on-off" button switches the printer or the printer in the position "on
-The problem is not the existence of the power to the printer is usually marked with an indicator light not lit, the printer uses for the indicator light to the power indicator.
3. USB cable data cable connections-check printer, if connected to the parallel port/USB port on the computer or leptop correctly-try to use another printer data cable as an experiment > Kalo PAL using a Microsoft Windows operating system, and using a printer connected to the parallel port of the reply in the The intent of the above command is to deflect the results display "dir" command (command to list displays the contents of a directory) of the reply should be to monitor but the computer's parallel port to be sure to install > driver for the printer.
> Verify driver has chosen a proper reply to the printer used.
> Verify has chosen port yg right for printer
Try using standard > text editor application to create the operating system print something Reply text editor application can print, then it is likely the fault is not on the printer.
Try to change the settings of the Default printer > became "Printer"-or try to reinstall the printer driver by the name of the printer and change the new installation as the "Default Printer".
Be sure to have the hard drive space > write. Sometimes the reply buffer was not enough, then the data is sent to the printer can not perfectly.
> Try to change setting "spooler" to printer through printer properties menu.
Features "spooler" is used with the purpose to be able to run the application when done printing the document.
Check whether there is any resource > reply conflict with the ports used by the printer. Use the help of the "hardware troubleshooter" reply in case of conflicts. This case might also be caused by the computer's propertied troubled port.
> Kalo steps above already done but not found "bright spot", try to move the printer port connection to another port or try the printer on another computer
1. Printer Connections-check the connections with electrical network printer in your home – make sure the printer power cable has been plugged into the power cord connector perfectly
2. Switch Printer-make sure the switch is "on-off" button switches the printer or the printer in the position "on
-The problem is not the existence of the power to the printer is usually marked with an indicator light not lit, the printer uses for the indicator light to the power indicator.
3. USB cable data cable connections-check printer, if connected to the parallel port/USB port on the computer or leptop correctly-try to use another printer data cable as an experiment > Kalo PAL using a Microsoft Windows operating system, and using a printer connected to the parallel port of the reply in the The intent of the above command is to deflect the results display "dir" command (command to list displays the contents of a directory) of the reply should be to monitor but the computer's parallel port to be sure to install > driver for the printer.
> Verify driver has chosen a proper reply to the printer used.
> Verify has chosen port yg right for printer
Try using standard > text editor application to create the operating system print something Reply text editor application can print, then it is likely the fault is not on the printer.
Try to change the settings of the Default printer > became "Printer"-or try to reinstall the printer driver by the name of the printer and change the new installation as the "Default Printer".
Be sure to have the hard drive space > write. Sometimes the reply buffer was not enough, then the data is sent to the printer can not perfectly.
> Try to change setting "spooler" to printer through printer properties menu.
Features "spooler" is used with the purpose to be able to run the application when done printing the document.
Check whether there is any resource > reply conflict with the ports used by the printer. Use the help of the "hardware troubleshooter" reply in case of conflicts. This case might also be caused by the computer's propertied troubled port.
> Kalo steps above already done but not found "bright spot", try to move the printer port connection to another port or try the printer on another computer
Monday, August 21, 2017
Resolve the Printer Prints Striped Easily
August 21, 2017
When you experience a printer may not work perfectly, the Office work will not be completed on time, to correct in the workshops of printer takes a long time, you can fix it yourself, because the trick quite easily one of the damage that often occurs is the result of the printer are not nice and outgoing line on each line sentence that is already typed.
There are several factors that occur when the printer is experiencing kegagaln print (prints of striped). These factors are certainly important to detect, in order to help overcome the prints printer striped.
The first factor is the striped prints a dirty encouder. One part in the printer that the printer sensor to function is Encouder. Encouder is located at the rear of the cartridge made from plastic MICA in length extending from the far right up to the end of the left side of the printer. The failure also affected by print Head cartridge already damaged or weak so it can't print data with optimal.
How to troubleshoot a Printer Prints the striped is
1. If dirty, simply wipe the encouder part encouder slowly by using tisyu. Or you can also revoke the encouder then soak use warm water for a few moments
2. If the ink to clot, try to soak the cartridge in the water rubbing alcohol, then suck the ink in the cartridge
3. If the flow of ink on the printer ink drip type hose clogged, do the process of cleaning by using dumper can help unleash a stream of ink, the possibility of a damaged cartridge can also trigger the print results are insufficient. For that, you are advised to replace the cartridge with a new cartridge, or by changing the settings on the printer.
Based on the info that was already described above, certainly can already known about the tips and ways to overcome the failure of the prints that often dotted or striped. Based on the discussion this time around, you certainly don't have to worry in case of failure of the print results data is striped.
There are several factors that occur when the printer is experiencing kegagaln print (prints of striped). These factors are certainly important to detect, in order to help overcome the prints printer striped.
The first factor is the striped prints a dirty encouder. One part in the printer that the printer sensor to function is Encouder. Encouder is located at the rear of the cartridge made from plastic MICA in length extending from the far right up to the end of the left side of the printer. The failure also affected by print Head cartridge already damaged or weak so it can't print data with optimal.
How to troubleshoot a Printer Prints the striped is
1. If dirty, simply wipe the encouder part encouder slowly by using tisyu. Or you can also revoke the encouder then soak use warm water for a few moments
2. If the ink to clot, try to soak the cartridge in the water rubbing alcohol, then suck the ink in the cartridge
3. If the flow of ink on the printer ink drip type hose clogged, do the process of cleaning by using dumper can help unleash a stream of ink, the possibility of a damaged cartridge can also trigger the print results are insufficient. For that, you are advised to replace the cartridge with a new cartridge, or by changing the settings on the printer.
Based on the info that was already described above, certainly can already known about the tips and ways to overcome the failure of the prints that often dotted or striped. Based on the discussion this time around, you certainly don't have to worry in case of failure of the print results data is striped.
Subscribe to:
Posts (Atom)
